Checkers
A checker compares two representations of the same fact and reports the difference. Only a deterministic checker produces a verdict a gate will accept.
SRS section 11.2, checker authority
Deterministic checkers
3
Currently passing
0
Never run
1
Runs recorded
0
Failures are retained alongside passes.
CHK-REQ-CFGRequirement to configurationFail
Compares every canonical requirement attribute against the corresponding value in the stored configuration snapshot payload.
Preconditions: A configuration snapshot exists for the configured item and at least one canonical fact exists.
Gate-effective. A PASS from this checker can satisfy a completion condition.
CHK-REQ-SLDRequirement to single line diagram parametersFail
Compares canonical electrical ratings against the parameters recorded on the engineering objects that the single line diagram depicts.
Preconditions: The single line diagram artifact is issued and its objects carry attributes.
Gate-effective. A PASS from this checker can satisfy a completion condition.
CHK-BSL-DOCBaseline to document revisionNot checked
Verifies that every artifact revision inside a frozen baseline is still the current revision of its document and that its content hash is unchanged.
Preconditions: At least one baseline exists.
Gate-effective. A PASS from this checker can satisfy a completion condition.
CHK-AI-COMPLETENESSSpecification completeness reviewAI-checked
Reads the tender specification and suggests attributes that appear to be discussed but were never extracted. Advisory only.
Preconditions: An ingested specification revision exists.
Advisory. Its output is recorded as AI-CHECKED and no gate consults it.
No checker has been run in this project.
No failing findings.